|
 |
INVERTER PREHEATER |
HOME | PRODUCTS | CABLE INSTRUMENTS | INVERTER PREHEATER |
|
Model Name |
|
1. HP-180P24 |
|
2. HP-220P48 |
|
3. HP-220P96 |
|
4. HP-300P96 |
|
|
 |
HP-180P24
During extrusion work for steel or non-steel sheath peeling, this
HP Series Inverter Preheater can greatly improve quality and productivity. Applicable cables include: thin wires with high resistivity and high speed cable extrusion (preheating conductors).
When you peel off sheaths of steel or nickel wire or steel net wire, you need a preheater with high performance: the HP Series Inverter Preheater is the perfect solution. |
 |
HP-220P48
When you need preheating at 150 degrees on copper wires with a diameter of 2.5mm or less and the line speed is within the range of 500mpm~1500mpm, you need to choose an Inverter Preheater.
Depending on the cable type, you can save up to 20 types of work characteristics and you can also preheat at a consistent temperature.
The menus to be set: offset, Slope Value, Point to the output, Decel. Time, Accel. Time and more. |
|
|
|
Product Specs |
MODEL |
HP-12070CAP |
HP-180P24 |
HP-220P24 |
HP-220P48 |
HP-300P48 |
Pulley |
120mm*3150mm*1 |
HP-180P24 |
HP-220P24 |
HP-220P48 |
HP-300P48 |
Wire size |
STEEL,CU,SOLID, STRAND |
0. 2 ~ 1.5mm |
0.5 ~ 3mm |
0.8 ~ 4.5mm |
Wire temp.Setting range |
0 ~ 299 กษ |
Capacity |
220V 25KVA |
220V 7KVA |
220V 7KVA |
220V 15KVA |
220V 15KVA |
Work frequency |
1000Hz |
Remotr control |
0 ~ 10V DC INPUT |
Capstan motor |
Servo motor control |
|
|
|
|
Work volt |
0 ~ 7V |
0 ~ 24V |
0 ~ 24V |
0 ~ 35V |
0 ~ 48V |
Power supply |
220/380VAC, 3Phase, 50/60Hz |
Steel/Line speed |
Steel/1200 |
Steel/500 |
Steel/300 |
Steel/500 |
Steel/1000 |
CU/Line speed |
CU/2500 |
CU/100 |
CU/700 |
CU/1000 |
CU/2000 |
|
|
 |
|